WI-FI 6/7 MESH & SLIM RESIDENTIAL GATEWAYS  

Smart Home Device Solutions

Ultra-low profile, sinking-PCB Integrated RJ45 Connectors and miniature SMD LAN Transformers. Engineered to overcome enclosure height restrictions and eliminate RF desense between high-speed 2.5G Ethernet PHYs and co-located Wi-Fi 6E/7 antennas.

< 10.5mm
ABOVE-PCB HEIGHT
2.5G & 5G
MULTI-GIG BASE-T
-40 dB
RF HARMONIC ATTENUATION
> 40%
PCB AREA SAVED

Coexistence & Mechanical Footprint Challenges

Consumer expectations for sleek, minimalist Wi-Fi pods force industrial designers to shrink enclosures while cramming multiple multi-gigabit LAN ports.

RF & ENCLOSURE BOTTLENECK  

The RF Desense Dilemma

When 2.5GBase-T Ethernet ports operate adjacent to high-gain Wi-Fi 6/7 MIMO antennas, high-frequency PHY clock harmonics radiate into radio receivers.

▸  
Wi-Fi Throughput Collapse (Desense):Clocks at 125MHz/250MHz and their harmonics bleed into 2.4GHz and 5.8GHz channels, reducing Wi-Fi sensitivity by 6dB~12dB.
▸  
Strict Enclosure Height Caps:Mesh nodes and smart wall pads under 20mm thickness cannot physically accommodate standard 13.5mm RJ45 connectors.
▸  
Standby Energy Mandates:European EuP Lot 6 and Energy Star require ultra-low idle standby power dissipation.
RF MITIGATION & CO-DESIGN  

Our Acoustic & RF Engineered Solution

We deploy mid-mount (sinking PCB) mechanical designs coupled with custom notch-filter magnetics to achieve harmonious coexistence.

✓  
Sinking Mid-Mount RJ45:Sits flush into PCB cutouts, lowering the above-board profile to just 9.5mm to 10.5mm.
✓  
Harmonic Trap Notch Magnetics:Custom internal common-mode choke cores suppress radiated emissions in the 2.4GHz to 6GHz bands by over 40dB.
✓  
Multi-Point Shell Grounding:Multiple chassis grounding spring tabs bond firmly to enclosure metalwork, preventing floating ground radiation.
 CERTIFIED COMPONENT LINEUP  

Compact & RF-Shielded Hardware Matrix

Fully tested and compliant with IEEE 802.3bz (2.5G/5GBase-T), FCC Part 15 Class B, and RoHS.

Part Number SeriesSpeed ClassForm FactorAbove-PCB HeightShielding / EMI TabsPackage Type
TRJM19434CNL2.5GBase-TMid-Mount Sinking PCB9.8 mmFull Metal + RF TabsMagJack (Integrated)
TRJK7003A98NL1000Base-TTab-Up Horizontal11.3 mmEMI Spring FingersMagJack (Integrated)
TRC72450ANL2.5G / 5GMiniature Discrete SMD4.0 mm (Low Profile)Ferrite ShieldedDiscrete 24-Pin SMD
 * Customized pinouts and mechanical sinking depths available upon inquiry.  IEEE 802.3bz & FCC Class B Compliant  
 RAPID HARDWARE PROTOTYPING      

Solve Your Wi-Fi RF Desense Issues

Request 3D STEP mechanical models and engineering samples of our mid-mount 2.5G MagJacks for immediate prototype fit checks.

Free 3D STEP & DXF Models · Direct Engineering Support from Senior RF FAEs